CMZ TD Z800-Z1350 Series lathes – TD25YS
TD25YS
- Categories:
- Tags:
Additional Information
| Max. Dia. swing over bed (mm) | |
|---|---|
| Max. Dia. swing over slides (mm) | |
| Max. turning Dia. (mm) | |
| Distance between spindle and tailstock center (mm) Z800 | |
| Distance between spindle and tailstock center (mm) Z1350 | |
| Distance between center of spindles (mm) | |
| X-axis travel (mm) | |
| Z-axis travel (mm) Z800 | |
| Z-axis travel (mm) Z1350 | |
| Y-axis travel (mm) | |
| B-axis travel (mm) Z800 | |
| B-axis travel (mm) Z1350 | |
| Fast feedrate X (m/min) | |
| Fast feedrate Z (m/min) | |
| Fast feedrate Y (m/min) | |
| Fast feedrate B (m/min) | |
| Axis acceleration | |
| Max. bar dia. (mm) | |
| Spindle power (kw) (max./S6 40%) | |
| Turning torque (lb.ft) | |
| Morse cone Dia. 150X150 ROTARY QUILL | |
| Morse cone DIA. 110X150 ROTARY QUILL | |
| Morse Cone DIA. 90x120 LIVE CENTER | |
| Morse Cone DIA. 90x120 ROTARY QUILL | |
| Tailstock travel (inch) Z800 | |
| Tailstock travel (inch) Z1350 | |
| Max. force (lbf) | |
| Number of positions | |
| Section of tools (mm) | |
| Changing time | |
| Interlocking force at 45 bar (kgf) | |
| Number of driven tools | |
| Turning speed (rpm) | |
| Power (HP) (max./S1) | |
| Max. torque (lb.ft | |
| Max. speed (rpm) | |
| Bearing outside dia. (mm) | |
| Bearing inside dia. (mm) | |
| Spindle nose | |
| Spindle inside dia. (mm) | |
| Bar dia (mm) | |
| Chuck dia (mm) | |
| Chuck bore (mm) | |
| Power (HP) (max./ S6 40%) | |
| Coolant tank (gal) Z800 REAR | |
| Coolant tank (gal) Z1350 | |
| Hydraulic oil tank (liters) | |
| Lubrication oil tank (liters) | |
| Installed power KVA | |
| Functioning voltage | |
| Environmental temperature | |
| Total weight (lb) Z800 | |
| Total weight (lb) Z1350 | |
| Dimensions (mm) TD Z800 | |
| Dimensions (mm) TDY Z800 | |
| Dimensions (mm) TD 1350 | |
| Dimensions (mm) TDY 1350 | |
| Inner volume (ft3) TD Z800 | |
| Inner volume (ft3) TDY Z800 | |
| Inner volume (ft3) TD 1350 | |
| Inner volume (ft3) TDY 1350 |